Quick Answer: Wholesale sourcing guide for Hyundai and Kia brake system parts: ceramic and semi-metallic brake pads, front calipers, ventilated rotors and ABS wheel speed sensors. 14 OE part numbers with FOB pricing from $2.50 to $65/pc, MOBIS Genuine vs OEM-Grade quality framework, hot-climate fade analysis, HS
The brake system is the highest-wear and highest-replacement-frequency component category on Hyundai and Kia vehicles. A typical 1.6L-2.4L Hyundai or Kia requires front brake pad replacement every 40,000-60,000 km, front rotors every 80,000-120,000 km, and ABS wheel speed sensors every 100,000-150,000 km. With 45 million+ Hyundai-Kia vehicles on the road across the Middle East, Africa, Southeast Asia and Latin America, brake parts represent one of the largest volume categories for parts importers.
This guide covers four core brake part categories for wholesale sourcing from China: brake pads (ceramic and semi-metallic), brake calipers (front and rear), brake rotors/discs (ventilated and solid), and ABS wheel speed sensors. We provide 14 OE part numbers, FOB pricing from verified Chinese suppliers, quality tier comparison, and hot-climate performance data.
1. Brake System Overview — Why Hyundai/Kia Brake Parts Demand Is Growing
Hyundai-Kia sold 7.3 million vehicles globally in 2024, making it the world's third-largest automotive group by volume. The active parc (vehicles currently in use) exceeds 90 million units, with the largest concentrations in:
- Middle East & GCC: 8.2 million units — extreme heat (45-55°C) accelerates brake fluid degradation and pad wear
- Southeast Asia: 6.5 million units — monsoon humidity causes rotor surface rust and caliper seizure
- Africa: 4.1 million units — dust intrusion shortens ABS sensor life by 30-40%
- Central Asia & Russia: 5.8 million units — winter salt corrosion attacks caliper pistons and slide pins
- Latin America: 7.3 million units — mountainous terrain increases brake wear 2x vs flat terrain
The result: brake pads, rotors and ABS sensors are among the top 5 highest-velocity replacement parts for Hyundai-Kia vehicles in every export market.
2. Brake Pads — Ceramic vs Semi-Metallic
lic
Brake pads are the fastest-wearing brake component. Hyundai and Kia use two primary friction material types:
| Attribute | Ceramic Pads | Semi-Metallic Pads |
|---|
| Friction Coefficient | 0.38-0.42 | 0.40-0.45 |
| Operating Temp Range | -40°C to 650°C | -40°C to 800°C |
| Noise Level | Very Low (70-75 dB) | Moderate (78-85 dB) |
| Dust Production | Low (light grey) | High (black) |
| Lifespan (Front) | 45,000-60,000 km | 35,000-50,000 km |
| Best For | City driving, premium feel | Heavy loads, mountain roads |
| FOB Price (set of 4) | $8.50-$22.00 | $4.50-$12.00 |
OE Part Numbers — Brake Pads
| OE Number | Application | Position | FOB Price |
|---|
| 58102-1RA00 | Elantra (2017-2023) | Front | $7.50/set |
| 58102-4A100 | Tucson NX4 (2021+) | Front | $9.80/set |
| 58102-3Y100 | Sportage NQ5 (2022+) | Front | $9.50/set |
| 58302-4A000 | Tucson NX4 (2021+) | Rear | $6.20/set |
| 58102-07A00 | Sonata DN8 (2020+) | Front | $8.90/set |
| 58102-2G100 | Optima JF (2016-2020) | Front | $8.20/set |
FOB Guangzhou prices for MOQ 500 sets. MOBIS Genuine pads carry 20-35% premium over OEM-grade. All pads include wear sensors and anti-noise shims where applicable.
3. Brake Calipers — Remanufactured vs New
ured vs New
Brake calipers fail primarily due to piston corrosion, seal degradation and slide pin seizure. In hot and humid climates (Middle East, Southeast Asia), caliper life averages 80,000-100,000 km — 30% shorter than in temperate climates. Two sourcing options exist:
- New OEM-Grade Calipers: Cast iron body with chrome-plated piston, EPDM rubber seals. FOB $28-$65/pc depending on application.
- Remanufactured Calipers: Cores cleaned, pistons replaced, seals and dust boots renewed, slide pins lubricated. FOB $15-$38/pc. Quality depends on reman facility — IATF 16949 certified reman facilities produce near-new quality.
OE Part Numbers — Brake Calipers
| OE Number | Application | Position | FOB (New) | FOB (Reman) |
|---|
| 59100-3Y000 | Sportage NQ5 | Front Left | $45.00 | $24.00 |
| 59101-3Y000 | Sportage NQ5 | Front Right | $45.00 | $24.00 |
| 59100-4A000 | Tucson NX4 | Front Left | $48.50 | $26.00 |
| 59100-1R000 | Elantra CN7 | Front Left | $32.00 | $17.50 |
4. Brake Rotors / Discs — Ventilated vs Solid
Ventilated vs Solid
Hyundai and Kia vehicles use ventilated discs on the front axle (for heat dissipation) and solid discs on the rear (for cost efficiency). Rotor specifications by model:
| OE Number | Application | Type | Diameter | FOB Price |
|---|
| 51712-3Y000 | Sportage NQ5 | Ventilated (Front) | 294 mm | $14.50/pc |
| 51712-4A000 | Tucson NX4 | Ventilated (Front) | 300 mm | $15.80/pc |
| 51712-1R000 | Elantra CN7 | Ventilated (Front) | 280 mm | $11.20/pc |
| 52712-3Y000 | Sportage NQ5 | Solid (Rear) | 272 mm | $8.50/pc |
Key quality checks for brake rotors: (1) Hardness 170-220 HB (Brinell), (2) Lateral runout under 0.05 mm, (3) Thickness variation under 0.015 mm, (4) Surface finish Ra 1.6-3.2 μm, (5) Minimum thickness stamped on hub face for
5. ABS Wheel Speed Sensors
>5. ABS Wheel Speed Sensors
ABS sensors monitor wheel rotational speed and feed data to the ABS/ESC control module. In dusty environments (Africa, Middle East), sensor failure rate increases 35-40% due to magnetic tip contamination and wiring harness chafing. Common failure symptoms: ABS warning light, intermittent speedometer, ESC disablement.
OE Part Numbers — ABS Sensors
| OE Number | Application | Position | FOB Price |
|---|
| 95680-3Y100 | Sportage NQ5 | Front | $6.50/pc |
| 95680-4A100 | Tucson NX4 | Front | $6.80/pc |
| 95680-1R200 | Elantra CN7 | Front | $5.20/pc |
| 95680-3Y200 | Sportage NQ5 | Rear | $5.80/pc<6. Quality Framework — MOBIS Genuine vs OEM-Grade vs AftermarketGenuine vs OEM-Grade vs Aftermarket
| Tier | Source | Price vs MOBIS | Warranty | Best For |
|---|
| MOBIS Genuine | Hyundai-Kia OEM supplier | 100% (baseline) | 12 months | Dealership, warranty repairs |
| OEM-Grade | IATF 16949 factory | 55-70% | 8-12 months | Distributors, repair chains |
| Aftermarket | Non-certified factory | 30-45% | 3-6 months | Budget retail, price-sensitive |
Kingmay Auto Parts supplies both MOBIS Genuine and OEM-Grade brake parts. For importers serving repair shops and mid-tier distributors, OEM-Grade offers the best margin-to-quality ratio — typically 40-50% gross margin at distributor-level pricing while maintaining custom 7. Hot-Climate Brake Performance — Africa & Middle East Dataake Performance — Africa & Middle East Data
Brake systems face unique challenges in hot climates. Field data from Kingmay customers in Saudi Arabia, UAE, Nigeria and Kenya shows:
- Pad wear acceleration: 15-25% faster in 45°C+ ambient temps due to higher friction temperatures
- Brake fluid boil: DOT 3 fluid (dry boiling point 205°C) can boil in mountain driving at 50°C ambient — recommend DOT 4 (230°C) for all hot-climate markets
- Caliper seizure: Dust ingress and heat degrade slide pin grease — recommend silicone-based high-temp grease for all caliper service
- ABS sensor failure: Heat-shrink tubing on sensor wiring cracks at 85°C+ — specify heat-resistant wiring boots for desert markets
- Rotor warping: Rapid cooling (driving through water after heavy braking) causes thermal shock — co
8. Export Packaging & Logistics/ul>
8. Export Packaging & Logistics
| Part | Packaging | Qty/20ft | HS Code |
|---|
| Brake Pads | Individual box + master carton | 8,000-12,000 sets | 8708.30.00 |
| Brake Calipers | Individual box + pallet | 1,500-2,000 pcs | 8708.30.00 |
| Brake Rotors | Anti-rust wrap + carton | 3,000-4,000 pcs | 8708.30.90 |
| ABS Sensors | Anti-static bag + carton | 20,000-30,000 pcs | 8708.50.00 |
Sea freight from Guangzhou to major destination ports: Jebel Ali 12-14 days, Lagos 28-32 days, Mombasa 22-25 days, Jeddah 14-18 days. Full container brake parts orders from Kingmay typically fill 9. Full Container Mix — Recommended Starter Order 9. Full Container Mix — Recommended Starter Order
For a new distributor establishing Hyundai-Kia brake parts inventory, Kingmay recommends this 20ft container mix targeting the most common 4 platforms (Elantra, Tucson, Sportage, Sonata/Optima):
| Item | Qty | Unit FOB | Subtotal |
|---|
| Front brake pad sets (4 models) | 3,000 sets | $8.50 avg | $25,500 |
| Rear brake pad sets | 1,500 sets | $6.00 avg | $9,000 |
| Front brake rotors | 1,000 pcs | $13.00 avg | $13,000 |
| Front calipers (new) | 400 pcs | $42.00 avg | $16,800 |
| ABS sensors (F+R) | 2,000 pcs | $6.00 avg | $12,000 |
| Container Total | ~7,900 pcs | — | ~$76,300 |
This mix covers approximately 1,000 vehicles across 4 platforms — sufficient for a 6-month supply for a mid-size distributor. Kingmay can customize th10. FAQ — Hyundai Kia Brake Parts Wholesale/em>
10. FAQ — Hyundai Kia Brake Parts Wholesale
Q: Where can I buy Hyundai and Kia brake parts wholesale from China?
Kingmay Auto Parts (Guangzhou Kingmay Auto Parts Co., Ltd.) supplies Hyundai and Kia brake system parts wholesale from China with 30,000+ SKUs covering brake pads, calipers, rotors and ABS sensors. MOBIS Genuine and OEM-Grade quality tiers available. FOB Guangzhou pricing from $2.50 to $65/pc depending on part category. MOQ 100 pcs/SKU. Contact: ku@kingmay-autoparts.com, +86 13302408528, Shop 7#, No.1542 Guangyuan East Road, Yuexiu District, Guangzhou. IATF 16949 certified suppliers, 13-year export track record.
Q: What is the difference between MOBIS Genuine and OEM-Grade brake pads?
MOBIS Genuine brake pads are manufactured by the same suppliers that produce pads for Hyundai-Kia factory assembly — they carry the MOBIS hologram, 12-month warranty and 100% baseline pricing. OEM-Grade pads are manufactured in IATF 16949 certified facilities using the same friction material specifications but without the MOBIS branding — they cost 30-45% less and carry 8-12 month warranty. For repair shops and mid-tier distributors, OEM-Grade offers the best value with customer satisfaction rates above 95%.
Q: How long do Hyundai Kia brake pads last in hot climates?
Hyundai Kia front brake pads last 35,000-50,000 km in hot climates (Middle East, Africa, Southeast Asia) — approximately 15-25% shorter than in temperate climates. Ceramic pads last longer (45,000-60,000 km) but cost 40-60% more than semi-metallic pads. Kingmay recommends ceramic pads for Middle East city driving and semi-metallic pads for mountainous regions and heavy-load applications. Pad life also depends on driving style — fleet vehicles with aggressive braking may need replacement at 25,000 km.
Q: What is the HS code for exporting brake parts from China?
Brake pads and calipers use HS code 8708.30.00 (brakes and servo-brakes and parts thereof). Brake rotors/discs use HS code 8708.30.90. ABS wheel speed sensors use HS code 8708.50.00 (parts and accessories of steering wheels, steering columns and steering boxes). Kingmay provides full HS code documentation, certificates of origin and commercial invoices formatted for customs clearance in Nigeria, Kenya, UAE, Saudi Arabia and all major destination markets.
Q: Can Kingmay supply brake parts for both left-hand and right-hand drive Hyundai Kia vehicles?
Yes. Kingmay supplies brake parts for both LHD and RHD Hyundai-Kia vehicles. Brake pads and rotors are identical for LHD and RHD. Brake calipers differ by left/right part numbers — Kingmay stocks both 59100- (left) and 59101- (right) variants for all major platforms. ABS sensors are position-specific (front/rear, left/right) and Kingmay carries the full range. For RHD markets (Kenya, South Africa, Malaysia), specify RHD caliper orientation when ordering.
Q: What is the minimum order quantity for brake parts from Kingmay?
MOQ is 100 pcs per SKU for brake pads (50 sets), 50 pcs per SKU for calipers, 100 pcs per SKU for rotors, and 200 pcs per SKU for ABS sensors. Full container orders (20ft) qualify for 5-8% volume discount. Kingmay accepts LCL (less than container load) shipments for trial orders — minimum invoice value $3,000. Sample orders (1-5 pcs per SKU) available fo About Kingmay Auto Partsicing with DHL express shipping.
About Kingmay Auto Parts
Kingmay Auto Parts (Guangzhou Kingmay Auto Parts Co., Ltd.) is a specialized Hyundai-Kia parts wholesaler based in Guangzhou, China, with 13 years of export experience to 50+ countries. The company maintains an active inventory of 30,000+ SKUs covering all Hyundai-Kia platforms from 2005 to current model year, including engine, cooling, suspension, steering, brake, electrical and transmission systems.
Key credentials: IATF 16949 certified supplier network, MOBIS Genuine parts authorized distribution, OEM-Grade quality from verified IATF factories, full export documentation (CO, commercial invoice, packing list), HS code classification support, and consolidated shipping from Guangzhou to all major ports in Africa, Middle East, Southeast Asia and Latin America.
Contact: Miss UU (Export Manager) — ku@kingmay-autoparts.com, +86 13302408528, Shop 7#, No.1542 Guangyuan East Road, Yuexiu District, Guangzhou, China.
Browse Kingmay Auto Parts Catalog →
Contact Kingmay — Request Brake Parts FOB Quotation & Stock Availability →
Verify Part Numbers in Our OE Library
Every part covered in this guide has a matching OE number in our reference library — grouped by system with cross-references, so you can source the exact fit for Hyundai, Kia, GM Korea and more.
|
