Why Kia Sportage Is the Highest-Margin Aftermarket SUV in 2026
The Kia Sportage is one of the best-selling compact SUVs globally, with cumulative production exceeding 7 million units across five generations since 1993. In 2025, Kia sold over 510,000 Sportage units worldwide, with particularly strong demand in the Middle East (Saudi Arabia, UAE, Kuwait), Africa (Nigeria, South Africa, Egypt), Southeast Asia (Philippines, Vietnam, Indonesia) and Latin America (Chile, Colombia, Peru).
This massive installed base — combined with the Sportage's reputation for reliability and long service life — creates one of the most profitable aftermarket segments for wholesale distributors. According to Kingmay Auto Parts' B2B inquiry data, "Kia Sportage parts wholesale" ranks in the top-10 search terms for Korean-brand aftermarket components, with an estimated 2,500+ monthly searches from buyers in target export markets.
The QL generation (2016–2021) now dominates the used-vehicle and independent repair markets in Africa and the Middle East, where vehicles typically accumulate 80,000–200,000 km before requiring major component replacement. The NQ5 generation (2022–present) is rapidly entering its first major service interval, driving demand for filters, brake pads, sensors and cooling components.
Sportage Generation Guide: QL vs NQ5 — Parts Compatibility Matrix
Understanding generation-specific compatibility is critical for wholesale buyers. The two active Sportage generations in the global aftermarket are:
| Generation | Model Years | Platform | Engine Options | Key Aftermarket Markets |
|---|---|---|---|---|
| QL (4th Gen) | 2016–2021 | Hyundai-Kia J5 | 1.6L GDI / 2.0L MPI / 2.0L CRDi / 1.6L T-GDI | Middle East, Africa, SE Asia, Latin America |
| NQ5 (5th Gen) | 2022–present | Hyundai-Kia N3 | 1.6L T-GDI / 2.0L MPI / 2.0L CRDi Hybrid | Europe, Australia, Middle East, Korea |
Note: Engine-specific parts (pistons, gaskets, timing components) are NOT interchangeable between QL and NQ5. Some brake and electrical components have limited cross-compatibility — always verify OE part number before ordering.
Key compatibility rules for wholesale buyers:
- Brake pads for the QL generation (2016–2021) are the highest-volume SKU — this generation dominates used car stocks in Saudi Arabia, Nigeria and South Africa.
- Thermostat housings, water pumps and cooling system components differ between QL and NQ5 due to engine bay redesign. The QL uses a cast-aluminum thermostat housing (OE: 25620-03800) while the NQ5 uses a revised plastic-composite unit.
- Fuel pump modules are generation-specific — the QL uses a saddle-type tank design with dual pump modules, while the NQ5 uses a single integrated pump module with a different mounting flange.
- ABS wheel speed sensors have the same electrical connector across both generations but different mounting brackets and cable lengths — verify front vs rear and left vs right before ordering.
Cooling System: Thermostat Housing, Water Pump & Radiator Assembly
Cooling system components are among the highest-failure-rate parts for the Sportage QL in high-temperature markets (Saudi Arabia, UAE, Nigeria, Egypt), where ambient temperatures regularly exceed 45°C. The most commonly replaced items are:
Thermostat Housing Assembly (OE Ref: 25620-03800)
The thermostat housing on the Sportage QL 2.0L MPI (G4NA engine) is a known weak point — the original plastic housing can crack after 60,000–90,000 km in hot climates, causing coolant leaks and potential engine overheating. The MOBIS genuine replacement (shown above) uses reinforced glass-filled nylon with a brass thermostat insert, rated to 120°C continuous operation.
| Specification | Detail |
|---|---|
| Application | Kia Sportage QL 2.0L MPI (G4NA) / 1.6L GDI (G4FJ) |
| OE Reference | 25620-03800, 25620-2G000, 25620-2G100 |
| Material | Glass-filled nylon housing + brass thermostat (82°C opening) |
| Includes | Housing + thermostat + gasket + temperature sensor port |
| MOBIS Genuine FOB | US$18–$26/unit (MOQ 20 pcs) |
| OEM-Grade FOB | US$12–$16/unit (MOQ 20 pcs) |
| Lead Time | 3–5 days (stock) / 12–18 days (production) |
Water Pump Assembly (OE Ref: 25100-2G500)
The water pump for the G4NA 2.0L MPI engine is a high-turnover item in Middle East and African markets. The MOBIS genuine unit uses a sealed ceramic bearing with a graphite composite mechanical seal, rated for 150,000 km service life under normal conditions (reduced to 80,000–100,000 km in high-dust, high-heat environments). FOB: US$22–$32/unit (MOQ 10 pcs).
Radiator Assembly (OE Ref: 25310-3W100)
Full aluminum radiator with plastic end tanks for the QL 2.0L automatic transmission. Core dimensions: 680 × 398 × 26 mm. Includes transmission oil cooler integrated into the lower tank. FOB: US$48–$68/unit (MOQ 5 pcs). Heavy-duty copper-brass upgrade available for desert-market vehicles (+35% cooling capacity, +40% weight, +25% cost).
Fuel System: Fuel Pump Module, Fuel Filter & Injector Assemblies
Fuel system components are critical for the Sportage in markets where fuel quality varies significantly. Ethanol-blended fuels (common in Brazil, Colombia, Philippines) and high-sulfur diesel (parts of Africa) accelerate fuel pump and injector wear.
Fuel Pump Module Assembly (OE Ref: 31110-3W700 / 31110-C7000)
| Specification | Detail |
|---|---|
| Application | Kia Sportage QL 2.0L MPI (G4NA) / 1.6L T-GDI (G4FJ) |
| Type | In-tank electric fuel pump module with saddle-type fuel tank (QL) |
| Pressure | 3.5 bar (gasoline MPI) / 5.0 bar (T-GDI direct injection) |
| Includes | Pump motor + fuel level sender + pressure regulator + filter screen + wiring harness |
| OE Cross-Reference | 31110-3W700, 31110-C7000, 31110-D3500 |
| MOBIS Genuine FOB | US$38–$55/unit (MOQ 10 pcs) |
| OEM-Grade FOB | US$28–$38/unit (MOQ 10 pcs) |
| Lead Time | 5–7 days (stock) / 18–25 days (production) |
Fuel Injector (OE Ref: 35310-2B000 / 35310-2B010)
Multi-hole solenoid injectors for the G4NA 2.0L MPI engine. Flow rate: 280 cc/min at 3.5 bar. Compatible with E10 ethanol blends. FOB: US$18–$28/pc (MOQ 20 pcs). T-GDI direct injection injectors (G4FJ 1.6L turbo) available on production order — MOQ 20 pcs, lead time 25 days.
Braking & Safety: ABS Wheel Speed Sensors, Brake Pads & Rotors
Brake and safety components are non-negotiable for wholesale buyers — these are the parts that directly affect vehicle safety and are subject to the strictest import regulations in target markets.
ABS Wheel Speed Sensor (OE Ref: 59810-D4000 / 59830-D4000 / 59810-D9000)
ABS wheel speed sensors are among the most frequently replaced electronic components on the Sportage QL, particularly in markets with poor road conditions (Nigeria, Kenya, parts of the Middle East) where sensor mounting brackets can be damaged by potholes and debris. The Hall-effect sensor detects wheel rotation speed and transmits data to the ABS/ESC control module.
| Position | OE Reference | FOB Price | MOQ | Notes |
|---|---|---|---|---|
| Front Left (FL) | 59810-D4000 | US$9–$14/pc | 20 pcs | Hall-effect, 12V, IP67, grey 2-pin connector |
| Front Right (FR) | 59830-D4000 | US$9–$14/pc | 20 pcs | Same spec, mirrored mounting bracket |
| Rear Left (RL) | 59810-D9000 | US$9–$14/pc | 20 pcs | Longer cable (850 mm vs 620 mm front) |
| Rear Right (RR) | 59830-D9000 | US$9–$14/pc | 20 pcs | Same spec, mirrored |
Brake Pads & Rotors
| Position | OE Reference (Pads) | OE Reference (Rotor) | Pad FOB | Rotor FOB |
|---|---|---|---|---|
| Front | 58101-D7A10 | 51712-D7000 | US$9–$13/set | US$18–$26/pc |
| Rear | 58302-D7A10 | 58411-D7000 | US$7–$10/set | US$14–$20/pc |
- Ceramic pads (OEM-Grade): Low dust, quiet operation, 40,000–55,000 km service life. Recommended for UAE, Saudi Arabia (fine dust environments). FOB +18% vs semi-metallic.
- Semi-metallic pads: Higher thermal capacity, aggressive bite profile. Recommended for Nigeria, South Africa, mountainous Latin America. Lower cost, 30,000–40,000 km service life.
Engine Management: Oxygen Sensors, Ignition Coils & MAP Sensors
Engine management sensors are the "nerve center" of the Sportage's powertrain — when they fail, the vehicle enters limp mode, fuel economy drops by 15–30%, and emissions exceed regulatory limits. These are high-margin, fast-turnover items for wholesale distributors.
Oxygen Sensor / Lambda Probe (OE Ref: 39210-2G150 / 39210-2G550)
| Specification | Detail |
|---|---|
| Application | Kia Sportage QL 2.0L MPI (G4NA) / 1.6L T-GDI (G4FJ) |
| Type | Zirconia dioxide, heated 4-wire |
| Position | Upstream (pre-cat) / Downstream (post-cat) |
| Connector | Grey 4-pin (upstream) / Black 4-pin (downstream) |
| Cable Length | 620 mm (upstream) / 480 mm (downstream) |
| OE Cross-Reference | 39210-2G150 (upstream), 39210-2G550 (downstream) |
| MOBIS Genuine FOB | US$14–$22/pc (MOQ 20 pcs) |
| OEM-Grade FOB | US$10–$15/pc (MOQ 20 pcs) |
Ignition Coil Pack (OE Ref: 27301-2B010)
Pencil-type ignition coil with integrated ignition module for the G4NA 2.0L MPI engine. Primary resistance: 0.75 Ω ± 15%. Secondary resistance: 13.5 kΩ ± 15%. Output voltage: 35 kV. FOB: US$9–$14/pc (MOQ 20 pcs). T-GDI coil packs (higher output, different connector) available on request.
MAP Sensor (OE Ref: 39300-2B000)
Manifold absolute pressure sensor for the G4NA 2.0L MPI engine. Output: 0.2–4.8V across 15–105 kPa range. Critical for fuel trim calculation — failure causes rich running, black smoke and poor fuel economy. FOB: US$8–$12/pc (MOQ 20 pcs).
Suspension & Chassis: Control Arms, Ball Joints & Wheel Bearings
| Part | OE Reference (QL) | FOB Price | MOQ | Notes |
|---|---|---|---|---|
| Front Lower Control Arm (L) | 54501-D7000 | US$32–$48 | 10 pcs | Includes pressed ball joint and bushings |
| Front Lower Control Arm (R) | 54500-D7000 | US$32–$48 | 10 pcs | Mirrored |
| Front Ball Joint (Lower) | 54530-D7000 | US$12–$18 | 20 pcs | MOOG-equivalent spec, greaseable |
| Front Strut Mount | 54610-D7000 | US$10–$15 | 20 pcs | With integrated bearing |
| Front Wheel Hub Bearing | 51750-D7000 | US$20–$28 | 20 pcs | Gen 2, ABS ring integrated |
| Rear Wheel Hub Bearing | 52730-D7000 | US$16–$24 | 20 pcs | Non-driven axle |
| Rear Trailing Arm (L) | 55270-D7000 | US$24–$36 | 10 pcs | Multi-link rear suspension |
| Sway Bar End Link (pair) | 54830-D7000 | US$7–$10 | 50 prs | High-turnover in rough-road markets |
Prices are FOB Nansha / Guangzhou. Q2 2026 reference pricing. Volume discounts (50+ units/SKU): 8–12% reduction. MOOG-equivalent spec available at +15% premium.
MOBIS Genuine vs OEM-Grade vs Aftermarket: A Three-Tier Quality Guide
| Grade | Source | Certification | Price vs MOBIS | Best For |
|---|---|---|---|---|
| MOBIS Genuine | Hyundai Mobis (Korea/China OEM supply) | OEM QMS, IATF 16949 | 100% | Warranty dealers, premium resellers, government fleet contracts |
| OEM-Grade (Tier 1) | IATF 16949-certified factories supplying or formerly supplying OEM | IATF 16949 / ISO 9001 | 50–65% | Volume importers, eBay/Amazon Power Sellers, independent repair chains |
| Quality Aftermarket | MOOG, Monroe, Delphi equivalents (Chinese manufacture) | ISO 9001 | 30–45% | General repair market, price-sensitive developing markets |
Kingmay Auto Parts operates across the MOBIS Genuine and OEM-Grade (Tier 1) segments. All parts undergo incoming inspection: dimensional verification, material hardness testing, surface treatment measurement, and functional bench testing before shipment. For MOBIS genuine parts, full traceability documentation (batch numbers, factory certificates, COA) is provided.
Wholesale FOB Price List: 20 High-Demand Kia Sportage SKUs
| # | Part Name | Gen | OE Reference | FOB Price | MOQ |
|---|---|---|---|---|---|
| 1 | Thermostat Housing Assembly | QL | 25620-03800 | US$18–$26 | 20 pcs |
| 2 | Water Pump Assembly | QL | 25100-2G500 | US$22–$32 | 10 pcs |
| 3 | Radiator Assembly (AT) | QL | 25310-3W100 | US$48–$68 | 5 pcs |
| 4 | Fuel Pump Module Assembly | QL | 31110-3W700 | US$38–$55 | 10 pcs |
| 5 | Fuel Injector (2.0L MPI) | QL | 35310-2B000 | US$18–$28 | 20 pcs |
| 6 | ABS Wheel Speed Sensor (FL) | QL | 59810-D4000 | US$9–$14 | 20 pcs |
| 7 | ABS Wheel Speed Sensor (RL) | QL | 59810-D9000 | US$9–$14 | 20 pcs |
| 8 | Front Brake Pad Set (Ceramic) | QL | 58101-D7A10 | US$9–$13 | 20 sets |
| 9 | Front Brake Rotor | QL | 51712-D7000 | US$18–$26 | 20 pcs |
| 10 | Rear Brake Pad Set | QL | 58302-D7A10 | US$7–$10 | 20 sets |
| 11 | Oxygen Sensor (Upstream) | QL | 39210-2G150 | US$14–$22 | 20 pcs |
| 12 | Oxygen Sensor (Downstream) | QL | 39210-2G550 | US$12–$18 | 20 pcs |
| 13 | Ignition Coil Pack | QL | 27301-2B010 | US$9–$14 | 20 pcs |
| 14 | MAP Sensor | QL | 39300-2B000 | US$8–$12 | 20 pcs |
| 15 | Front Lower Control Arm (L) | QL | 54501-D7000 | US$32–$48 | 10 pcs |
| 16 | Front Wheel Hub Bearing | QL | 51750-D7000 | US$20–$28 | 20 pcs |
| 17 | Rear Wheel Hub Bearing | QL | 52730-D7000 | US$16–$24 | 20 pcs |
| 18 | Sway Bar End Link (pair) | QL | 54830-D7000 | US$7–$10 | 50 prs |
| 19 | Air Filter | QL | 28113-D3300 | US$4–$6 | 100 pcs |
| 20 | Oil Filter | QL | 26300-35505 | US$2.50–$4 | 100 pcs |
FOB prices: Q2 2026, Nansha Port / Guangzhou. Prices vary by quantity, quality grade (MOBIS genuine vs OEM-Grade), and material specification. Request formal quotation for orders above MOQ.
Shipping & Customs: Middle East, Africa, Southeast Asia & Latin America
| Destination | Port | Transit | Min. Order | Incoterm | Regulatory Notes |
|---|---|---|---|---|---|
| Saudi Arabia (KSA) | Jeddah / Dammam | 12–18 days | US$500 FOB | FOB / CIF | SABER registration for brake pads, filters from 2026 |
| UAE (Dubai) | Jebel Ali (JAFZA) | 10–14 days | US$300 FOB | FOB / CIF | Free zone — popular re-export hub for Africa |
| Nigeria (Lagos) | Apapa / Tin Can | 25–32 days | US$800 FOB | FOB | SON mark required for brake components from Jan 2026 |
| South Africa | Durban | 18–24 days | US$500 FOB | FOB / DAP | NRCS LOA for safety-critical parts (brakes, steering, ABS) |
| Philippines | Manila | 8–12 days | US$300 FOB | FOB | BPS certification for brake pads; LTO type approval for ABS modules |
| Chile | Valparaíso | 28–35 days | US$600 FOB | FOB | SEC certification for electrical components; 6% import duty on auto parts |
Transit times via COSCO/MSC/Maersk direct liner service. Add 3–5 days for LCL consolidation. All export documentation (CO, commercial invoice, packing list, test reports) prepared by Kingmay export team.
FAQ: Sourcing Kia Sportage Parts from China
- Q1: How do I verify that a part is genuine MOBIS and not a counterfeit?
- Genuine MOBIS parts carry a holographic security label with a QR code that links to the Mobis verification portal. The packaging uses specific MOBIS brown cardboard with the Kia logo and part number printed in black. Kingmay Auto Parts provides full traceability documentation including factory batch numbers, COA (Certificate of Analysis), and MOBIS distribution invoices for all genuine parts.
- Q2: What is the difference between MOBIS genuine and OEM-Grade for the same part?
- MOBIS genuine parts are manufactured by Hyundai Mobis or its directly contracted Tier 1 suppliers and sold through the official MOBIS distribution network. OEM-Grade parts are manufactured by IATF 16949-certified factories that meet or exceed OEM specifications but are not sold through the MOBIS channel. Functionally, both are identical in most cases — the difference is in packaging, traceability documentation, and warranty terms. MOBIS genuine carries a 12-month warranty; OEM-Grade carries a 6-month warranty.
- Q3: Can you supply both QL and NQ5 generation parts in one shipment?
- Yes. Multi-generation mixed orders are standard practice. We consolidate at our Guangzhou warehouse and issue a single combined invoice and packing list. Many Middle East and African distributors stock both QL (for the large used-vehicle fleet) and NQ5 (for the growing new-vehicle fleet) parts simultaneously.
- Q4: What are payment terms for new wholesale accounts?
- New buyers: 30% T/T deposit, 70% T/T before shipment. Established accounts (3+ completed orders): 30% deposit / 70% against copy of B/L. Letter of Credit (at sight) available for orders above US$8,000. For MOBIS genuine parts orders above US$15,000, we offer 45-day open account terms after credit verification.
- Q5: Do you provide OE cross-reference verification before I place an order?
- Absolutely. Send us the VIN or the chassis code (e.g., QL PE G4NA 2.0L) and we cross-reference against the Hyundai-Kia EPC (Electronic Parts Catalog) to confirm the correct OE reference, supersession numbers, and compatibility. We provide a formal parts confirmation sheet before order confirmation at no charge.
- Q6: What is the minimum order for a first-time buyer who wants to test quality?
- We recommend a sample order of 3–5 SKUs at MOQ level (typically US$200–$500 FOB) for first-time buyers. This allows you to evaluate product quality, packaging, and documentation before committing to a full container. Sample orders ship via express courier (DHL/FedEx) with 5–7 day delivery to most destinations.
Ready to source Kia Sportage parts wholesale from China? Get your FOB quotation within 24 hours.
Browse Kingmay Auto Parts — MOBIS Genuine & OEM-Grade Kia Wholesale Supplier →
Contact our export team for pricing, OE cross-reference & logistics →
Verify Part Numbers in Our OE Library
Every part covered in this guide has a matching OE number in our reference library — grouped by system with cross-references, so you can source the exact fit for Hyundai, Kia, GM Korea and more.
Related Articles
Related Products
From our Cooling System catalog — 4 products ready for export
