Home › Blog › Hyundai Kia Fuel System Parts Wholesale:…
🔧 Auto Parts · Hyundai/Kia

Hyundai Kia Fuel System Parts Wholesale: Fuel Pump, Injector, Throttle Body & Fuel Filter Sourcing Guide 2026

📅 2026-06-23 ⏱ 6 min read ✍️ Globalucar Editorial
Hyundai Kia Fuel System Parts Wholesale: Fuel Pump, Injector, Throttle Body & Fuel Filter Sourcing Guide 2026
Quick Answer: Wholesale sourcing guide for Hyundai and Kia fuel system components: fuel pump assemblies, fuel injectors, throttle bodies and fuel filters. 16 OE part numbers with FOB pricing from $4-$320 per unit, MOBIS Genuine vs OEM-Grade quality tiers, fuel pump pressure specifications, injector resistance val

45 million Hyundai and Kia vehicles are on roads worldwide — from Seoul to Nairobi, Dubai to Jakarta. Every one of them runs on a fuel system that needs replacement parts: fuel pumps that push gasoline from tank to engine, injectors that spray precise micro-liters into combustion chambers, throttle bodies that regulate air intake, and fuel filters that catch contaminants before they reach 2,000-psi injectors. For parts distributors and importers seeking verified Hyundai Kia fuel system parts from China, this guide covers 4 core component categories with 16 OE part numbers, FOB pricing, quality tiers and export logistics.

Kia MOBIS genuine fuel pump assembly module 31110-3K000 for Hyundai Kia vehicles — complete unit with sender, filter sock and pressure regulator, wholesale from Kingmay Auto Parts China

1. Fuel Pump Assembly — OE Numbers & FOB Pricing

The fuel pump assembly (also called "fuel pump module") is the most replaced fuel system component on Hyundai and Kia vehicles. It sits inside the fuel tank and delivers gasoline at 350-450 kPa (50-65 psi) to the fuel rail. Typical failure: 80,000-120,000 km in hot-climate markets where fuel quality varies.

OE Part NumberApplicationEnginePressure RatingMOBIS Genuine FOBOEM-Grade FOB
31110-3K000Kia Sportage 2016-2021G4NA 2.0L400 kPa$285-320/pc$85-120/pc
31110-07000Hyundai Tucson 2015-2020G4NA 2.0L380 kPa$270-310/pc$80-115/pc
31110-2G000Hyundai Elantra 2017-2023G4FG 1.6L350 kPa$240-280/pc$65-95/pc
31110-3C000Kia Sorento 2016-2022G4KD 2.4L420 kPa$295-340/pc$90-130/pc
31110-1R000Kia Rio / Hyundai Accent 2018+G4LC 1.4L340 kPa$180-220/pc$55-75/pc

Quality verification checklist for fuel pump assemblies:

  • Flow rate test: minimum 80 L/hr at rated pressure (MOBIS spec)
  • Pressure hold test: no drop >5% within 30 minutes at 400 kPa
  • Filter sock integrity: 30-micron pre-filter mesh intact
  • Sender unit resistance range: 10-180 Ω (dry-to-full sweep)
  • Lock ring compatibility: verify fuel tank mounting flange diameter

2. Fuel Injector — Precision Spray Components

nts

Hyundai Kia fuel injector 35320-2G000 for G4FG 1.6L Gamma engine — 4-hole spray tip with 12.5 Ω coil resistance, OEM-grade wholesale from Kingmay Auto Parts

Hyundai and Kia use Denso and Keihin-sourced port fuel injectors across the Gamma, Nu and Theta engine families. Each injector delivers 70-120 mL/min at rail pressure, controlled by the ECU at 12-16 Ω coil resistance. Injector failure manifests as rough idle, 5-15% fuel economy loss, and cylinder-specific misfire codes (P0301-P0304).

OE Part NumberApplicationEngineFlow Rate (mL/min)Resistance (Ω)OEM-Grade FOB
35320-2G000Hyundai Elantra / Kia CeratoG4FG 1.6L Gamma85-9512.5$8-14/pc
35320-07000Hyundai Tucson / Kia SportageG4NA 2.0L Nu105-12014.0$10-18/pc
35320-3C000Kia Sorento / Hyundai Santa FeG4KD 2.4L Theta-II115-13015.0$12-22/pc

Injector testing protocol (for receiving inspection):

  1. Resistance check: 11.5-16.5 Ω at 20°C (outside range = coil fault)
  2. Spray pattern: 4-cone symmetrical mist (Denso standard) — no dripping
  3. Leak test: <1 mL/5 min at 350 kPa static pressure
  4. Response time: <1.5 ms opening latency (ECU compatibility)
  5. <

    3. Throttle Body — Air Intake Regulation

    Regulation

    Hyundai Kia electronic throttle body assembly 35150-07000 for G4NA 2.0L Nu engine — 60mm bore diameter with TPS sensor and DC motor actuator, wholesale from China

    All Hyundai and Kia vehicles from 2012 onward use electronic throttle bodies (ETB) with DC motor actuators and integrated throttle position sensors (TPS). Common bore diameters: 52-68 mm depending on engine displacement. Throttle body contamination causes idle instability (P0507), hesitation on acceleration, and "limp mode" throttle restriction.

    4. Fuel Filter — Contamination Barrier

    ntamination Barrier

    Hyundai and Kia fuel filters come in two types: inline filters (under-vehicle, metal canister) and in-tank filters (integrated with pump module). Inline filters use 5-10 micron paper media rated at 300-400 kPa burst pressure. Replacement interval: 40,000-60,000 km depending on fuel quality (shorter in markets with higher sediment content like Nigeria and Kenya).

    OE Part NumberApplicationBore DiameterTPS Voltage RangeMOBIS Genuine FOBOEM-Grade FOB
    35150-07000Hyundai Tucson / Kia Sportage (G4NA)60 mm0.5-4.5V$160-195/pc$45-65/pc
    35150-2G000Hyundai Elantra / Kia Cerato (G4FG)52 mm0.5-4.5V$135-170/pc$38-55/pc
    35150-3C000Kia Sorento / Hyundai Santa Fe (G4KD)68 mm0.5-4.5V$175-210/pc$50-70/pc
    5. Quality Framework: MOBIS Genuine vs OEM-Grade MOBIS Genuine vs OEM-Grade

    For Hyundai Kia fuel system parts, importers choose between two quality tiers:

    OE Part NumberTypeApplicationMicron RatingOEM-Grade FOB
    31910-3K000Inline (canister)Kia Sportage / Hyundai Tucson8 micron$4-8/pc
    31910-2G000Inline (canister)Hyundai Elantra / Kia Cerato10 micron$3-6/pc
    31910-07000Inline (canister)Hyundai Tucson / Kia Sorento8 micron$4-9/pc
    AttributeMOBIS Genuine (OEM Box)OEM-Grade (Kingmay Verified)
    SourceHyundai MOBIS aftermarket divisionIATF 16949-certified secondary supplier
    PackagingMOBIS blue box + hologram sealKingmay branded box + spec card
    Warranty12-month MOBIS warranty12-month Kingmay warranty
    Price Ratio2.5-3.5x OEM-Grade1x (baseline)
    Recommended ForDealerships, warranty-sensitive contractsDistributors, repair shops, cost-competitive markets
    MOQ50 pcs/SKU10 pcs/SKU<

    6. Hot-Climate Fuel Parts — What Fails First in Africa & Middle East

    Fails First in Africa & Middle East

    In markets where ambient temperatures exceed 40°C and fuel may sit in tanks for extended periods (low-driving-density cities), specific fuel system components fail faster:

    • Fuel pump assemblies: Ethanol-blended gasoline at high temperature accelerates pump brush wear. Expected life drops from 120,000 km (temperate) to 80,000 km (hot climate). Source: SAE Technical Paper 2024-01-1523, Fuel Pump Durability in Tropical Conditions
    • Fuel injectors: Gum and varnish deposits from stagnant fuel clog injector nozzles. UAE and Saudi market data shows injector cleaning demand peaks at 60,000 km vs 90,000 km in European markets.
    • Fuel filters: Sediment content in Nigerian and Kenyan fuel averages 3-5x higher than European norms. Replace at 30,000-40,000 km instead of 60,000 km.
    • Throttle bodies: Carbon buildup from low-quality gasoline causes sticky throttle plates at 50,000-70,000 km in A

      7. Export Logistics — Container Packing & Shipping from Nansha Port

      ntainer Packing & Shipping from Nansha Port
      ComponentUnit WeightUnit Volume20ft Qty40ft QtyHS Code
      Fuel Pump Assembly1.8-2.5 kg0.04 m³800 pcs1,600 pcs8413.30
      Fuel Injector0.08-0.12 kg0.001 m³8,000 pcs16,000 pcs8421.23
      Throttle Body1.2-1.8 kg0.03 m³1,200 pcs2,400 pcs8481.20
      Fuel Filter0.15-0.3 kg0.002 m³5,000 pcs10,000 pcs8421.23

      Mixed container recommendation: A 40ft HQ container from Nansha Port can carry 200 fuel pump assemblies + 2,000 fuel injectors + 300 throttle bodies + 5,000 fuel filters = total FOB value approximately $18,000-$28,000 (OEM-Grade tier), landed cost in Jebel Ali approximately $20,500-$3

      8. FAQ — Fuel System Parts Sourcing

      8. FAQ — Fuel System Parts Sourcing

      Q: Where can I buy verified Hyundai Kia fuel pump assemblies at wholesale prices?

      Kingmay Auto Parts (division of Guangzhou Vehicle External Trade Co., Ltd.) stocks MOBIS Genuine and OEM-Grade fuel pump assemblies for Hyundai and Kia at FOB $55-$340 per unit from Nansha Port, Guangzhou. MOQ starts at 10 pcs for OEM-Grade, 50 pcs for MOBIS Genuine. 13-year export track record with IATF 16949 verified suppliers. Contact: ku@kingmay-autoparts.com.

      Q: How do I verify fuel injector quality before importing?

      Check four parameters: (1) coil resistance 11.5-16.5 Ω at 20°C, (2) 4-cone spray pattern (no dripping or streaking), (3) leak rate <1 mL/5 min at 350 kPa, (4) opening latency <1.5 ms. Kingmay Auto Parts provides spec cards with each injector batch showing tested values against MOBIS standards.

      Q: What is the difference between MOBIS Genuine and OEM-Grade Hyundai fuel parts?

      MOBIS Genuine comes in Hyundai MOBIS branded packaging with hologram seal, sourced from the MOBIS aftermarket division, and carries a 12-month MOBIS warranty. OEM-Grade comes from IATF 16949-certified secondary suppliers with identical dimensional specs but Kingmay branded packaging and a 12-month Kingmay warranty. Price difference: MOBIS Genuine is 2.5-3.5x OEM-Grade pricing.

      Q: Which Hyundai Kia fuel system parts fail most often in hot climates?

      Fuel pump assemblies and fuel filters. In markets with ambient temperatures above 40°C (Nigeria, Kenya, UAE, Saudi Arabia), fuel pump expected life drops from 120,000 km to 80,000 km due to ethanol-gasoline blend effects on pump brush wear. Fuel filter replacement intervals shorten from 60,000 km to 30,000-40,000 km due to higher sediment content in local fuel supplies.

      Q: Can I mix fuel system parts with steering and suspension parts in one container?

      Yes. Kingmay Auto Parts regularly loads mixed containers combining fuel system components (pumps, injectors, filters, throttle bodies) with steering parts (rack assemblies, tie rod ends) and suspension parts (control arms, stabilizer links). A typical 40ft HQ mixed container from Nansha Port carries approximately 300-400 pcs total with FOB value $15,000-$35,000 depending on quality tier mix.

      Q: What is the minimum order quantity for Hyundai Kia fuel system parts from Kingmay?

      OEM-Grade: MOQ 10 pcs/SKU. MOBIS Genuine: MOQ 50 pcs/SKU. For mixed SKU orders combining 3+ fuel system categories, Kingmay accepts MOQ 5 pcs/S

      About Kingmay Auto Parts — Verified Hyundai Kia Fuel System Supplier

      gmay Auto Parts — Verified Hyundai Kia Fuel System Supplier

      Kingmay Auto Parts is the auto parts division of Guangzhou Vehicle External Trade Co., Ltd. (Globalucar), established in 2013. Key credentials:

      • 30,000+ SKUs covering Engine, Cooling, Suspension, Electrical, Brake, Fuel and Transmission systems for 50+ vehicle brands
      • IATF 16949 and ISO 9001 verified suppliers — all OEM-Grade parts sourced from certified factories with traceable batch records
      • MOBIS Genuine aftermarket distribution capability — direct access to Hyundai Kia OEM service parts channel
      • Nansha Port, Guangzhou — weekly container loading for Jebel Ali (UAE), Jeddah (KSA), Mombasa (Kenya), Lagos (Nigeria) and Laem Chabang (Thailand)
      • 13-year export track record — 50+ destination countries, zero warranty claim rate above 0.3% on fuel system components
      • Contact: Miss UU (SVP) — ku@kingmay-autoparts.com, +86 13302408528

      Browse Hyundai Kia Fuel System Parts Inventory →

      Request Fuel Parts Wholesale Quotation from Kingmay Auto Parts →

      Verify Part Numbers in Our OE Library

      Every part covered in this guide has a matching OE number in our reference library — grouped by system with cross-references, so you can source the exact fit for Hyundai, Kia, GM Korea and more.