OE 54830-2H200 — Link ASSY FR Stabili for Hyundai / Kia

Standard minimum order is 10 pieces per part number. Mixed orders that combine 54830-2H200 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a link assy fr stabili the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

Position depends on the platform. On most Hyundai / Kia applications the link assy fr stabili sits on the suspension, steering & brake assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

A supersession happens when the maker revises a link assy fr stabili and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 54830-2H200 we list the current reference; ask our desk for written confirmation before a large order.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.