OE 48609-0D050 — KINGSTEEL Wholesale Strut Mount Auto Parts Car Rubber Shock Absorber Mounting Fo for Toyota

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

Three checks: the code printed on your old part must read 48609-0D050; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the kingsteel wholesale strut mount auto parts car rubber shock absorber mounting fo should be inspected, and reference 48609-0D050 replaced if it measures outside specification.

Every shipment of 48609-0D050 leaves with a packing list, photo documentation and a QC report. Warranty terms are agreed per contract and reference that inspection record; claims are settled in writing against the documentation.