OE 09473-D3710 — Bearing Remover Adopter for Hyundai

Standard minimum order is 10 pieces per part number. Mixed orders that combine 09473-D3710 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

OE 09473-D3710 is the factory reference for this bearing remover adopter on selected Hyundai models. The Applications table on this page lists the confirmed rows — check trim level and build year against your own fleet before ordering, because one reference can cover several body variants.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the suspension, steering & brake family — always confirm dimensions and connector layout before you swap.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a bearing remover adopter the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.