OE 39610-3C500 — Sensor Crankshaft Angle No 2 for Hyundai

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Three checks: the code printed on your old part must read 39610-3C500; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 39610-3C500 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

Incoming batches pass a dimensional check, a material look-up against the electrical & sensors specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Stock references leave Guangzhou within 7 working days. If 39610-3C500 needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the electrical & sensors family — always confirm dimensions and connector layout before you swap.