OE 39180-03AA5 — Sensor Crankshaft Position for Hyundai

Incoming batches pass a dimensional check, a material look-up against the electrical & sensors specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Aftermarket sensor crankshaft position comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Stock references leave Guangzhou within 7 working days. If 39180-03AA5 needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

A supersession happens when the maker revises a sensor crankshaft position and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 39180-03AA5 we list the current reference; ask our desk for written confirmation before a large order.

Noise normally traces to worn internal surfaces, a loose mount, a dry bearing or contact with a neighbouring part. Isolate it by reproducing the sound at a fixed speed, then compare against the reference photo for 39180-03AA5 to confirm the right replacement.

Three checks: the code printed on your old part must read 39180-03AA5; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.