OE 35341-2E500 — Wire Harness Gdi Injector for Hyundai

Three checks: the code printed on your old part must read 35341-2E500; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 35341-2E500 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

Aftermarket wire harness gdi injector comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 35341-2E500 with other engine & fuel system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the engine & fuel system family — always confirm dimensions and connector layout before you swap.