OE 35341-2B160 — Harness Injector for Hyundai

Aftermarket harness injector comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Three checks: the code printed on your old part must read 35341-2B160; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Report it with the order number and packing-list line plus photographs. Because every carton is photographed before loading, we can trace the batch immediately and settle the claim against the inspection record instead of arguing from memory.

For a short distance at reduced load, usually yes — but the risk compounds. A degraded harness injector transfers stress to neighbouring components, so a small repair can grow into a full engine & fuel system rebuild. Book the replacement once the symptom is repeatable.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.