OE 35313-2M400 — Washer Injector Brkt for Hyundai

Three checks: the code printed on your old part must read 35313-2M400; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 35313-2M400 with other engine & fuel system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Incoming batches pass a dimensional check, a material look-up against the engine & fuel system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the engine & fuel system family — always confirm dimensions and connector layout before you swap.

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the washer injector brkt should be inspected, and reference 35313-2M400 replaced if it measures outside specification.

Aftermarket washer injector brkt comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.