OE 09351-D2100 — Injector Remover Adapter for Hyundai

Incoming batches pass a dimensional check, a material look-up against the engine & fuel system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Aftermarket injector remover adapter comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Three checks: the code printed on your old part must read 09351-D2100; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

OE 09351-D2100 is the factory reference for this injector remover adapter on selected Hyundai models. The Applications table on this page lists the confirmed rows — check trim level and build year against your own fleet before ordering, because one reference can cover several body variants.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 09351-D2100 with other engine & fuel system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.