OE 31129803498 — Control Arm Bushing for Hyundai / Kia

Standard minimum order is 10 pieces per part number. Mixed orders that combine 31129803498 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the suspension, steering & brake family — always confirm dimensions and connector layout before you swap.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the control arm bushing should be inspected, and reference 31129803498 replaced if it measures outside specification.

Aftermarket control arm bushing comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Three checks: the code printed on your old part must read 31129803498; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.