OE 1233520565 — Control Arm Bushing for Mercedes-Benz

Standard minimum order is 10 pieces per part number. Mixed orders that combine 1233520565 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Three checks: the code printed on your old part must read 1233520565; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 1233520565 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.