OE 28751-2B000 — Gasket Exhaust Pipe for Hyundai

A supersession happens when the maker revises a gasket exhaust pipe and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 28751-2B000 we list the current reference; ask our desk for written confirmation before a large order.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Stock references leave Guangzhou within 7 working days. If 28751-2B000 needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest engine & fuel system reference and narrow by build year. Send photos and we will cross-check the number for you.

Incoming batches pass a dimensional check, a material look-up against the engine & fuel system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.