OE 21114-2S000 — Bolt Bearing Cap for Hyundai

Aftermarket bolt bearing cap comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the bolt bearing cap should be inspected, and reference 21114-2S000 replaced if it measures outside specification.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a bolt bearing cap the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

Report it with the order number and packing-list line plus photographs. Because every carton is photographed before loading, we can trace the batch immediately and settle the claim against the inspection record instead of arguing from memory.