OE 21114-2J000 — Bolt Bearing Cap for Hyundai

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Three checks: the code printed on your old part must read 21114-2J000; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Bulk pricing is tiered: 10 pieces, 50 pieces and full-carton quantities each carry a different unit rate. Piece price also moves with packing format and whether your own brand is printed on the carton, so tell us the landed quantity you are planning.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 21114-2J000 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.