OE 171407182D — Control Arm Bushing for Volkswagen

Aftermarket control arm bushing comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

A supersession happens when the maker revises a control arm bushing and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 171407182D we list the current reference; ask our desk for written confirmation before a large order.

Stock references leave Guangzhou within 7 working days. If 171407182D needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

Three checks: the code printed on your old part must read 171407182D; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.