OE 54500-JG000 — Auto Control Arms For NISSAN X-Trail T31 2007-2010 for Nissan

Aftermarket auto control arms for nissan x-trail t31 2007-2010 comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the suspension, steering & brake family — always confirm dimensions and connector layout before you swap.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a auto control arms for nissan x-trail t31 2007-2010 the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.