OE 895407147A — Control Arm for Audi

Position depends on the platform. On most Audi applications the control arm sits on the suspension, steering & brake assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Stock references leave Guangzhou within 7 working days. If 895407147A needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a control arm the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.