OE 55322-31U00 — KINGSTEEL New Brand Auto Spare Parts Rubber Strut Mount Shock Absorber Mounting for Nissan

A supersession happens when the maker revises a kingsteel new brand auto spare parts rubber strut mount shock absorber mounting and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 55322-31U00 we list the current reference; ask our desk for written confirmation before a large order.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a kingsteel new brand auto spare parts rubber strut mount shock absorber mounting the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the kingsteel new brand auto spare parts rubber strut mount shock absorber mounting should be inspected, and reference 55322-31U00 replaced if it measures outside specification.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

OE 55322-31U00 is the factory reference for this kingsteel new brand auto spare parts rubber strut mount shock absorber mounting on selected Nissan models. The Applications table on this page lists the confirmed rows — check trim level and build year against your own fleet before ordering, because one reference can cover several body variants.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.