OE 45615-3D000 — Retainer U D Brake for Hyundai

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a retainer u d brake the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

For a short distance at reduced load, usually yes — but the risk compounds. A degraded retainer u d brake transfers stress to neighbouring components, so a small repair can grow into a full brake system rebuild. Book the replacement once the symptom is repeatable.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest brake system reference and narrow by build year. Send photos and we will cross-check the number for you.

Report it with the order number and packing-list line plus photographs. Because every carton is photographed before loading, we can trace the batch immediately and settle the claim against the inspection record instead of arguing from memory.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 45615-3D000 with other brake system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.