OE 45557-4G650 — Bearing Ball for Hyundai

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the bearing ball should be inspected, and reference 45557-4G650 replaced if it measures outside specification.

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 45557-4G650 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 45557-4G650 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Aftermarket bearing ball comes from tooling houses that hold the original drawings or licensed equivalents. KingMay sources from vetted factories and inspects each batch; the manufacturer name is available on request where your market requires origin documentation.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.

Every shipment of 45557-4G650 leaves with a packing list, photo documentation and a QC report. Warranty terms are agreed per contract and reference that inspection record; claims are settled in writing against the documentation.