OE 43392-3A000 — Cone Reverse Brake for Hyundai

For a short distance at reduced load, usually yes — but the risk compounds. A degraded cone reverse brake transfers stress to neighbouring components, so a small repair can grow into a full brake system rebuild. Book the replacement once the symptom is repeatable.

Position depends on the platform. On most Hyundai applications the cone reverse brake sits on the brake system assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest brake system reference and narrow by build year. Send photos and we will cross-check the number for you.

Bulk pricing is tiered: 10 pieces, 50 pieces and full-carton quantities each carry a different unit rate. Piece price also moves with packing format and whether your own brand is printed on the carton, so tell us the landed quantity you are planning.

Incoming batches pass a dimensional check, a material look-up against the brake system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Three checks: the code printed on your old part must read 43392-3A000; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.