OE 36139-3F100 — Packing Starter for Hyundai

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 36139-3F100 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a packing starter the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

For a short distance at reduced load, usually yes — but the risk compounds. A degraded packing starter transfers stress to neighbouring components, so a small repair can grow into a full electrical & sensors rebuild. Book the replacement once the symptom is repeatable.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 36139-3F100 with other electrical & sensors references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the electrical & sensors family — always confirm dimensions and connector layout before you swap.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest electrical & sensors reference and narrow by build year. Send photos and we will cross-check the number for you.