OE 35345-3F021 — Injector Foam for Hyundai

Bulk pricing is tiered: 10 pieces, 50 pieces and full-carton quantities each carry a different unit rate. Piece price also moves with packing format and whether your own brand is printed on the carton, so tell us the landed quantity you are planning.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a injector foam the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

Match three things: the code on the part you are removing, the build-year range in the Applications table, and the mounting points visible in the reference photo. If all three line up, 35345-3F021 is a confirmed fit. Send your VIN and our export desk will double-check the ambiguous cases.

Incoming batches pass a dimensional check, a material look-up against the engine & fuel system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest engine & fuel system reference and narrow by build year. Send photos and we will cross-check the number for you.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.