OE 32800-P0400 — Pedal ASSY Brake for Hyundai

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest brake system reference and narrow by build year. Send photos and we will cross-check the number for you.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a pedal assy brake the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

OE 32800-P0400 is the factory reference for this pedal assy brake on selected Hyundai models. The Applications table on this page lists the confirmed rows — check trim level and build year against your own fleet before ordering, because one reference can cover several body variants.

Incoming batches pass a dimensional check, a material look-up against the brake system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the brake system family — always confirm dimensions and connector layout before you swap.