OE 25411-2S100 — Hose Radiator Upper for Hyundai

Three checks: the code printed on your old part must read 25411-2S100; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest cooling system reference and narrow by build year. Send photos and we will cross-check the number for you.

Stock references leave Guangzhou within 7 working days. If 25411-2S100 needs a production run, allow 25-35 days depending on quantity and surface treatment. The schedule is confirmed in writing when the order is placed.

Position depends on the platform. On most Hyundai applications the hose radiator upper sits on the cooling system assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

Incoming batches pass a dimensional check, a material look-up against the cooling system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.