OE 25310-0A280 — Radiator ASSY for Hyundai

Position depends on the platform. On most Hyundai applications the radiator assy sits on the cooling system assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

Incoming batches pass a dimensional check, a material look-up against the cooling system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Three checks: the code printed on your old part must read 25310-0A280; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

A supersession happens when the maker revises a radiator assy and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 25310-0A280 we list the current reference; ask our desk for written confirmation before a large order.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 25310-0A280 with other cooling system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest cooling system reference and narrow by build year. Send photos and we will cross-check the number for you.