OE 23200-3L050 — Crank Position Sensor Wheel for Hyundai

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest electrical & sensors reference and narrow by build year. Send photos and we will cross-check the number for you.

Incoming batches pass a dimensional check, a material look-up against the electrical & sensors specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

OEM means the part was produced for the vehicle maker's assembly line; aftermarket means it is made independently to the same engineering drawing. For a crank position sensor wheel the practical gap is usually tooling age and packaging rather than fit, provided the tolerance class matches.

The Related OE References table above lists the alternates we see most often in trade inquiries. Cross-references work because the engineering envelope is shared across the electrical & sensors family — always confirm dimensions and connector layout before you swap.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 23200-3L050 with other electrical & sensors references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.