OE 22060-31U11 — Knock Sensor for Hyundai / Kia

For a short distance at reduced load, usually yes — but the risk compounds. A degraded knock sensor transfers stress to neighbouring components, so a small repair can grow into a full electrical & sensors rebuild. Book the replacement once the symptom is repeatable.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 22060-31U11 with other electrical & sensors references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest electrical & sensors reference and narrow by build year. Send photos and we will cross-check the number for you.

Every shipment of 22060-31U11 leaves with a packing list, photo documentation and a QC report. Warranty terms are agreed per contract and reference that inspection record; claims are settled in writing against the documentation.

Three checks: the code printed on your old part must read 22060-31U11; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.