OE 21020-2T013 — Bearing Pair Set Crk Shf for Hyundai

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 21020-2T013 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Three checks: the code printed on your old part must read 21020-2T013; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Yes, if the alternate shares the same engineering envelope. Shortlist candidates from the Related OE References table, then check bolt pattern, electrical pinout and material grade. A difference in any of those three means it is a different part, not a substitute.