OE 1632400317 — Engine Mount for Mercedes-Benz

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest suspension, steering & brake reference and narrow by build year. Send photos and we will cross-check the number for you.

Incoming batches pass a dimensional check, a material look-up against the suspension, steering & brake specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 1632400317 with other suspension, steering & brake references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

Three checks: the code printed on your old part must read 1632400317; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.

Noise normally traces to worn internal surfaces, a loose mount, a dry bearing or contact with a neighbouring part. Isolate it by reproducing the sound at a fixed speed, then compare against the reference photo for 1632400317 to confirm the right replacement.