OE 1111536041 — Cylinder Head Gasket for DAIHATSU ALTIS Saloon, LEXUS NX (_Z1_), NX I (_Z1_), NX for Toyota

Watch for noise on cold start, vibration under load, warning lights, fluid seepage or uneven operation. Once any of those appears the cylinder head gasket for daihatsu altis saloon, lexus nx (_z1_), nx i (_z1_), nx should be inspected, and reference 1111536041 replaced if it measures outside specification.

Build-year coverage is listed row by row in the Applications table above. Where several generations share one number, the newer rows usually carry a revised suffix — compare the last four characters before buying, since a suffix change often means a different connector or bracket.

Standard minimum order is 10 pieces per part number. Mixed orders that combine 1111536041 with other engine & fuel system references are welcome — that is how most clients fill an LCL or FCL container without over-stocking a single line.

A supersession happens when the maker revises a cylinder head gasket for daihatsu altis saloon, lexus nx (_z1_), nx i (_z1_), nx and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 1111536041 we list the current reference; ask our desk for written confirmation before a large order.

Incoming batches pass a dimensional check, a material look-up against the engine & fuel system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Three checks: the code printed on your old part must read 1111536041; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.