OE 11060BC200 — Water Pump for Nissan Tiida Note Cube Wingroad – Replaces 21010-ED000 / B1010-ED for Hyundai / Kia

A supersession happens when the maker revises a water pump for nissan tiida note cube wingroad – replaces 21010-ed000 / b1010-ed and issues a new tail number. The revision normally changes a small physical detail rather than the fit. Where we know a supersession chain for 11060BC200 we list the current reference; ask our desk for written confirmation before a large order.

Incoming batches pass a dimensional check, a material look-up against the cooling system specification, and a visual inspection for finish defects. Critical dimensions are measured per carton and the photographs are archived against the order number.

Start from the code cast or printed on the part you are removing — that is the authoritative source. If it is illegible, use the Applications table on the closest cooling system reference and narrow by build year. Send photos and we will cross-check the number for you.

Treat it as a wear item: inspect every 20,000-30,000 km and replace at the first sign of leakage, noise or performance loss. Real service life swings widely with climate, road surface and duty cycle, so mileage on its own is a weak indicator.

Position depends on the platform. On most Hyundai / Kia applications the water pump for nissan tiida note cube wingroad – replaces 21010-ed000 / b1010-ed sits on the cooling system assembly and can be reached from the engine bay or the underbody without removing the dashboard. Torque figures and disassembly order are given in the workshop manual for each model.

Three checks: the code printed on your old part must read 11060BC200; the number must fall inside the build-year range in the Applications table; and the connector, thread or bolt pattern must match the reference photo. Codes cast into the housing are the most reliable source.